1976 Sabre 28

The bottom paid was removed down to the fiberglass followed by 2 new barrier coats and 2 coats of ablative bottom paint. 

Renovations I have completed.

               -sanded bottom to the entire 28 ft. of fiberglass and then applied two barrier coats and 2 bottom paint. 

               -removed the 4 cylinder 16 hp gas engine that was installed in the interior of the boat and replaced it with a 15 hp outboard engine, that is extremely reliable and cuts down on gas fumes.  This outboard pushes the boat quite well

-fixed the bulkheads and head sink area that were suffering from rot and replaced with new mahogany.

-replaced all of the light bulbs on the boat with LED lights including the mast head and interior lights.

-had the Sail Loft in St. Michaels go over the sails and covers.  They made any needed repairs.

-reinstalled the macerator pump for the head and remounted the head.

-cleaned and repaired the cushions.

-removed the alcohol stove and replaced with a custom cutting board.  The stove can be replaced.

-replaced bilge pump and have an extra pump if need be.

-cleaned and sanded all of the interior cabinets and drawers to prepare for repainting.

-replaced the marine batteries

-repaired the forward hatch and reinstalled.

-removed the old fuel tank and replaced it with a 5-gallon tank.

-addressed some leaks and have the needed seals to replace the salon windows.

-I am sure there was more that was done to the boat and will inform you later.

-The title is clear.